GE 45600 User Manual - Page 6
SETTING UP AND CONTROLLING A GROUP, Removing a Device Light / Node from a Group - remote
UPC - 043180456007
View all GE 45600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
5 • To dim the light, press and hold the OFF key for more than one second. (Green LED blinks rapidly) NOTE: If the red LED emits one long, steady blink the remote has not successfully communicated with the device. Repeat steps 1-2 if this occurs. SETTING UP AND CONTROLLING A GROUP You can create a collection of devices (lights / nodes) that you can control as a group. You can set up a maximum of 18 groups. Each group can contain up to 232 devices. Adding a Device (Light / Node) to a Group To add a device to a group, perform the following steps: 1. Press and hold SETUP until both the red and green LEDs blink twice. 2. Press ADD once. (Red LED blinks once) 3. Press GROUP once. (Red LED blinks once) 4. Press a digit (1-9) for the group you wish to add the device to. Press SHIFT and the digit (1-9) if you are adding a devices to groups 10 through 18. (Green LED blinks rapidly) 5. Press the button on the device so that it sends its information to the remote and receives information from the remote. 6. When the green LED blinks twice, you have successfully added the device to your group. NOTE: If the red LED emits one long, steady blink, you have pressed an invalid key or the device has not been successfully added to your group. Repeat steps 1-6 if this occurs. Removing a Device (Light / Node) from a Group 1. Press and hold SETUP until both the red and green LEDs blink twice. 2. Press REMOVE once. (Red LED blinks once) 3. Press GROUP once. (Red LED blinks once) 4. Press a digit (1-9) for the group you wish to remove the device from. Press SHIFT and the digit (1-9) if you are removing a device from groups 10 through 18. (Green LED blinks rapidly) 5. Press the button on the device you wish to remove. 6. When the green LED blinks twice, you have successfully removed the device from your group. NOTE: If the red LED emits one long, steady blink, you have pressed an invalid key or the device has not been successfully removed from your group. Repeat steps 1-6 if this occurs.