GE 60-873-95 Installation Instructions - Page 4

Specifications Notices Compatibility 60-873-95: All ITI 319.5 MHz Learn Mode™ panels Housing material: Flame retardant ABS Dimensions: 4.24” (10.8 cm) length 3.13” (8.0 cm) width 1.70” (4.3 cm) depth Operational voltage: 2.6 to 4.5 VDC Current draw: 26µA typical average Battery Life: 5 years typical Batteries: (2) Duracell DL 123A 3V Lithium Transmitter Frequency: 319.5 MHz Transmitter Conditions: Alarm, Tamper, Low Battery Supervisory RF Immunity: 20V/meter 1MHz to 1000 MHz Microphone: Omnidirectional electret Operating Temperature Range: 32° to 120°F (0° to 50°C) Storage Temperature Range: -30° to 140°F (-34° to 60°C) Max. Humidity: 90% Relative Humidity (noncondensing) Recommended Glass Size: Minimum 1' x 2' (0.3m x 0.6m) or larger Glass thickness: Plate: 3/32" to 1/4" (2.4mm to 6.4mm) Tempered: 1/8" to 1/4" (3.2mm to 6.4mm) Wired: 1/4" (6.4mm) Laminated: 1/8" to 1/4" (3.2mm to 6.4mm) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ❑ Reorient or relocate the receiving antenna. ❑ Increase the distance between the equipment and receiver. ❑ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ❑ Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: B4Z-799A-SOUND © 2000 Interlogix, Inc. Interlogix, Learn Mode, and Pattern Recognition Technology are trademarks of Interlogix, Inc. ITI, Sentrol, and ShatterPro are registered trademarks of Interlogix, Inc. Protected under US and foreign patents including: 3,863,250; 4,745,398; 4,837,558; 4,885,713; 5,192,931; 5,805,063; 5,776,206; 5,872,512; 5,942,981; and other patents pending. 4