GE AEH25DL Owners Manual - Page 11
Window Requirements, Remove The Air Conditioner, From The Case, Prepare The Window, Wood Pieces
UPC - 084691177043
View all GE AEH25DL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Window Installation Instructions 1 WINDOW REQUIREMENTS • These instructions are for a standard double-hung window. You will need to modify them for other types of windows. • The air conditioner can be installed without the accordion panels if needed to fit in a narrow window. See the window opening dimensions. • All supporting parts must be secured to firm wood, masonry or metal. • The electrical outlet must be within reach of the power cord. 3 REMOVE THE AIR CONDITIONER FROM THE CASE A Remove the locking screw and locking bracket from the lower frame. Save to reinstall later. B Remove the ground screw and save to reinstall later. 18″ min. 30″ to 41″ (With accordion panels) Remove the ground screw and save to reinstall later C Slide the air conditioner from the case by gripping the base pan handle and pulling forward while bracing the case. 2 STORM WINDOW REQUIREMENTS A storm window frame will not allow the air conditioner to tilt toward the outside, and will keep it from draining properly. To adjust for this, attach a piece of wood to the stool. WOOD PIECES- WIDTH: 2″ LENGTH: Long enough to fit inside the window frame. THICKNESS: To determine the thickness, place a piece of wood on the sill to make it 1/2″ higher than the top of the storm window frame or the vinyl frame. Attach securely with nails or screws provided by the installer. 4 PREPARE THE WINDOW Cut the window sash seal to the proper length. Peel off the backing and attach the seal to the underside of the window sash. 1/2″ higher than storm window frame Storm window frame 1/2″ higher than vinyl frame (on some windows) Wood Sill Vinyl frame 11