GE AEH25DL Owners Manual - Page 14

Window Installation Instructions 8 INSTALL THE AIR CONDITIONER IN THE CASE A Make sure the ground wire is off to the side and slide the air conditioner into the case. Do not push on the controls or the finned coils. Make sure the air conditioner is firmly seated. B Reinstall the locking bracket and screw removed earlier. C Reconnect the ground wire to the air conditioner using the screw removed earlier. IMPORTANT: The ground wire must be reinstalled to ensure a proper ground. 8 INSTALL THE AIR CONDITIONER IN THE CASE (cont.) G Pull the coiled power cord from its shipped position in the air discharge area. Attach the front grille frame to the case by inserting the tabs on the grille frame into the slots on the front top of the case. Guide the lever carefully through the grille frame as you push it in. H Press the grille frame in around the power cord on the right side. Secure the grille with a type F (painted) screw on each side and a type C screw in the front. Type F screw D Remove the front grille from its box and remove the shipping tape. E Grasp the inlet grille at the bottom corners and pull it forward. Unhook it from its top hinges and set it aside. Type F screw I Reinstall the filter. Type C screw F Using the tab, pull up slightly on the filter to release it and pull it down and out. J Reinstall the inlet grille. Connect power. Caulk or weather-strip any gaps or openings to the outside to seal the installation. 14