GE ASH06LL Owners Manual - Page 12

Installation Instructions [] PREPARE AIR CONDITIONER (CONT.) [] Insert the frames of the accordion panels into the top and bottom mounting rails. Attach the accordion panels to the side of the case using 6 type A screws, Top mounting [] INSTALL AIR CONDITIONER IN WINDOW (CONT.) [] Extend the left and right accordion panels to the vertical window sashes and attach with 4 type B screws. Type B screws Type B screws Accordion panels [] INSTALL AIR CONDITIONER IN WINDOW [] Cut the window sash seal to the window width and stick the adhesive side to the bottom of the sash. --Window sash seal [] Place the air conditioner on the sill with the bottom mounting rail against its back edge. Center it and close the window securely behind the top mounting rail. It should be level or slightly tilted to the outside. Use a level; about a 1/3 bubble will be the correct case slant to the outside. [] Attach the brackets to the sill on both sides using two type B screws. [] Tighten the screws to secure the brackets in place on each side of the air conditioner. [] INSTALL SECURITY BRACKET AND FOAM TOP WINDOW GASKET [] Attach a security bracket with a type B screw. [] Cut the foam top window gasket to the window width. [] Stuff the foam between the glass and the window to prevent air and insects from getting into the room. / Caulk or weather-strip any gaps or openings to the outside to seal the installation. The installation is now complete, 12