GE DPGT750ECPL Owners Manual - Page 37
Installation Instructions, SWITCHING THE WASHER AND DRYER BACKSPLASHES, not required for most
UPC - 084691079729
View all GE DPGT750ECPL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Installation Instructions SWITCHING THE WASHER AND DRYER BACKSPLASHES (not required for most installations) When viewed from the front, the washer is shipped for installation on the left and the dryer is shipped for installation on the right. If your hose utility connections are arranged so that the units must be installed with the washer on the right and the dryer on the left, you can switch the backsplashes of the washer and dryer in order to maintain the proper curved appearance. 1 REMOVE WASHER BACKSPLASH Place a towel over the lid of the washer to prevent scratches to the surface. Remove the two outer screws from the rear of the washer backsplash. Rotate backsplash forward and lift off. Screw Screw TOOLS YOU WILL NEED ❑ #2 Phillips screwdriver ❑ Towel (2) WARNING! Make sure the washer and dryer are unplugged. Rear of Washer 2 REMOVE BACKSPLASH REAR COVER Remove the two screws holding the washer backsplash to the rear cover. Pull off the rear cover. Rear Cover Screws 37