GE DPGT750ECPL Owners Manual - Page 38

Disconnect Washer, Control Board, Remove Control Board, From Washer Backsplash, Remove Dryer

Get GE DPGT750ECPL - Profile Harmony 7.3 cu. Ft. Electric Dryer PDF manuals and user guides
UPC - 084691079729
View all GE DPGT750ECPL manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Installation Instructions 3 DISCONNECT WASHER CONTROL BOARD Disconnect the ribbon at the right of the control board by pulling the connector at the end of the ribbon off the metal pins on the control board. NOTE: Do not disconnect any other wires from the control board. 5 REMOVE DRYER BACKSPLASH Place a towel over the top surface of the dryer to prevent scratches to the surface. Remove the four screws from the rear of the dryer backsplash. Rotate backsplash forward and lift off. Screws Ribbon Rear of Washer 4 REMOVE CONTROL BOARD FROM WASHER BACKSPLASH Remove the four screws holding the control board to the backsplash. Remove the control board and set it aside. Screws Rear of Dryer 6 DISCONNECT DRYER CONTROL BOARD Disconnect the ribbon at the right of the control board by pulling the connector at the end of the ribbon off the metal pins on the control board. NOTE: Do not disconnect any other wires from the control board. Rear of Dryer 38

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
38
Installation Instructions
DISCONNECT WASHER
CONTROL BOARD
Disconnect the ribbon at the right of the
control board by pulling the connector at the
end of the ribbon off the metal pins on the
control board.
NOTE:
Do not disconnect any other wires
from the control board.
3
Rear of Washer
REMOVE CONTROL BOARD
FROM WASHER BACKSPLASH
Remove the four screws holding the control
board to the backsplash. Remove the control
board and set it aside.
4
Screws
Ribbon
REMOVE DRYER BACKSPLASH
Place a towel over the top surface of the dryer
to prevent scratches to the surface.
Remove the four screws from the rear of the
dryer backsplash. Rotate backsplash forward
and lift off.
5
Screws
DISCONNECT DRYER CONTROL
BOARD
Disconnect the ribbon at the right of the
control board by pulling the connector at the
end of the ribbon off the metal pins on the
control board.
NOTE:
Do not disconnect any other wires
from the control board.
6
Rear of Dryer
Rear of Dryer