GE DPGT750GCPL Owners Manual - Page 35
Installation Instructions, REVERSING THE DOOR SWING if desired
UPC - 084691079743
View all GE DPGT750GCPL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Installation Instructions REVERSING THE DOOR SWING (if desired) 1 REMOVE FILLER PLUGS Open the door and remove the filler plugs opposite the hinges. 3 REMOVE HANDLE Remove the screws holding the handle and two spacers. 2 REMOVE DOOR • With the door completely open, remove the BOTTOM screw from each hinge on the dryer face. • Insert the screws about halfway into the TOP holes, for each hinge, on the opposite side (where you removed the filler plugs). Apply firm pressure to get the screw started in new holes. Rear of Door Spacers 4 REVERSE DOOR CATCH Remove the door catch and filler plate. Install them on opposite sides of the door. Filler Plate Catch • Loosen the TOP screw from each hinge on the dryer face halfway. With one hand holding the top of the door and the other hand holding the bottom, remove the door from the dryer by lifting it UP and OUT. 35