GE GFE24JSKSS Use and Care Manual - Page 29
For Models with a Freezer DRAWER, For Models with a Freezer DOOR, TRANSFER HANDLE MOUNTING FASTENERS
View all GE GFE24JSKSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Installation Instructions H. Insert the top hinge pin inside the hole in the top left of the fresh food door. Make sure the door is aligned with the cabinet. Attach the hinge to the top of the cabinet loosely with the bolts that were removed previously. Make sure the gasket on the door is flush against the cabinet and not folded. Support the door on the handle side and make sure the door is straight and the gap between the doors is even across the front. While holding the door in place, tighten the screws to 60 in-lb. For Models with a Freezer DRAWER: I. Remove the front insert from the left hinge cover. Install the left hinge cover using a Phillips screwdriver and the screw removed earlier. J. Locate the insert for the right hinge cover that comes with the kit and install. Front insert K. Using a Phillips screwdriver, install the right hinge cover with screws provided. 4 TRANSFER HANDLE MOUNTING FASTENERS A. Remove the plug from the lower right whole. B. Using a Phillips screwdriver remove the screws holding the mounting brackets from the left side and install them on the right side. Front insert J. Install the front insert into the right hinge cover. Install the right hinge cover using a Phillips screwdriver and the screws removed earlier. Remove plug Front insert For Models with a Freezer DOOR: I. Locate the left hinge cover that comes with the kit. Using a Phillips screwdriver, install the cover with the screws provided. 5 INSTALLING LOGO BADGE A. Locate the new logo badge from the kit. Remove the adhesive backing paper and align the pins on the back of the badge with the holes in the door. Apply pressure to the badge to ensure it sticks to the door. B. Locate the button plug from the kit and install it in the opposite side of handle. 29