GE GLDT696TSS Installation Instructions - Page 2

Installation Preparation PARTS SUPPLIED:  Two #8 Phillips flat head wood screws, 5/8"long to secure dishwasher to underside of countertop (in literature package). 2 Wood Screws MATERIALS YOU WILL NEED:  Ferrule, compression nut and 90° Elbow (3/8"NPT external thread on one end, opposite end sized to fit water supply)  Thread seal tape  UL Listed wire nuts (3) 90° Elbow, Hand Ferrule and Shut-Off Compression Nut Valve Wire Nuts (3) Thread Seal Tape Materials For New Installations Only:  Air gap for drain hose, if required  Waste tee for house plumbing, if applicable  Electrical cable or power cord, if applicable  Screw type hose clamps  Strain relief for electrical connection.  Hand shut-off valve  Water line 3/8"min. copper  Coupler for extending drain line, if applicable Waste Tee Hot Water line Electrical Cable (or Power Cord, if applicable) Air Gap Screw Type Hose Clamps Strain Relief Coupler TOOLS YOU WILL NEED:  Phillips head screwdriver Level Screw Driver II  5/16"and 1/4"nutdriver  6" Adjustable wrench  Level  Carpenters square Phillips head screwdriver 5/16"and 6" Adjustable Level 2 1/4"nutdriver Crescwenret nWcrhench Nutdriver Carpenters  Measuring tape  Safety glasses Safety glasses Flashlight Measuring tape square  Flashlight   Bucket to catch waterMwheean sfluushriinnggSthaeTlfainepetey Gloves GlasFsleasshligChatrpenters Square For New Installations Only:  Tubing cutter Bucket Gloves  Drill and appropriate bits  Hole saw set Tubing cutter Drill and Bits Hole saw set Tubing Cutt2eDrrill & Bits