GE GTK17GBEBS Use and Care Manual - Page 11
Installation Instructions, REVERSING THE DOOR SWING
View all GE GTK17GBEBS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Installation Instructions 2 REVERSING THE DOOR SWING IMPORTANT NOTES When reversing the door swing: • Read the instructions all the way through before starting. • Handle parts carefully to avoid scratching paint. • Set screws down by their related parts to avoid using them in the wrong places. • Provide a non-scratching work surface for the doors. IMPORTANT: Once you begin, do not move the cabinet until door-swing reversal is completed. These instructions are for changing the hinges from WKHULJKWVLGHWRWKHOHIWVLGH³LI\RXHYHUZDQWWRFKDQJH the hinges back to the right side, follow these same instructions and reverse all references to left and right. TOOLS REQUIRED 2 REMOVE THE FREEZER DOOR 2.1 Tape the door shut with masking tape. 2.2 With a 5/16" hex-head socket driver, remove the screws that hold the top hinge to the cabinet. 2.3 Lift the hinge straight up to free the hinge pin from the socket in the top of the door and set it aside, along with its screws. Top Hinge Phillips screwdriver Masking tape 5/16" hex-head socket driver T20 or T25 Torxdriver QHHGHGIRUVRPH models) 2.4 Remove the tape and tilt the door away from the FDELQHW/LIWLWRȺWKHFHQWHUKLQJHSLQ Putty knife or thinblade screwdriver 5/16" open-end wrench 1 BEFORE YOU START 1.1 Unplug the refrigerator from its electrical outlet. 1.2 Empty all door shelves, including the dairy compartment. CAUTION: 'RQRWOHWHLWKHUGRRUGURSWRWKHÀRRU7R do so could damage the door stop. 2.5 Set the door on a non-scratching surface with the outside up. 2.6 Transfer the 2 screws from the opposite side of the cabinet to the screw holes vacated by the top hinge removal. 11