GE GTK17GBEBS Use and Care Manual - Page 4

About the temperature control dial., About the freezer compartment shelves., About the fresh food - model

Page 4 highlights

OFF OFF About the temperature control dial. Turning the dial to 2ȹVWRSVFRROLQJLQERWKFRPSDUWPHQWV³IUHVKIRRGDQGIUHH]HU,WGRHVQRWVKXWRȺSRZHU to the refrigerator. Temperature Control Dial RQVRPHPRGHOV The temperature control dial adjust refrigerator from warmest to coldest. The recommended factory setting is shown in illustration to the left. For colder temperature WXUQGLDOFORFNZLVHWRZDUGVQRZÀDNH)RUZDUPHUWHPSHUDWXUHWXUQGLDOFRXQWHUFORFNZLVH DZD\IURPVQRZÀDNHDOORZKRXUVIRUDGMXVWPHQW OFF OFF Recommened factory setting Coldest setting About the fresh food compartment shelves. Warmest setting Shelf supports at various levels allow you to custom-space your shelves. Not all features are on all models. 2 Lift up and out 1 Tilt up Half-Width Shelves One end of the shelf rests on a molded side-wall VXSSRUWDEUDFNHWRQWKHRWKHUHQGKRRNVLQWRD track on the rear cabinet wall. 7RUHPRYHOLIWWKHVKHOIXSDWIURQWWKHQRȺWKH support and out of the track. To replace, select desired shelf height. With shelf front raised slightly, hook the bracket's top lug into the track, then lower the shelf onto the support. Pull forward To remove the full-width shelves Full-Width Shelves Some models have a stationary tempered glass shelf, a spillproof shelf or two steel wire stationary shelves. These shelves can be moved to another place in the fresh food compartment. When placed correctly on the shelf supports, the shelf will stop before coming completely out of the refrigerator and will not tilt when you place food on it or remove food from it. Spillproof Shelves RQVRPHPRGHOV Spillproof shelves have special edges to help prevent spills from dripping to lower shelves. To remove or replace the shelves, see the above instructions. NOTE: The shelf to the right of the track is GHVLJQHGWRKRRNLQWRWKHULJKWKDQGVORWWKH shelf to the left is designed to hook into the lefthand slot. About the freezer compartment shelves. 1 23 Step Shelf RQVRPHPRGHOV To remove the step shelf: Lift left side of shelf slightly. Move shelf to the left to free its right ends from holes in the cabinet wall. Lower right side of shelf, move shelf to the right and take it out. To replace the step shelf: :LWKVKHOIWLOWHGDVVKRZQ¿WOHIWHQGVRI shelf into holes in cabinet wall. Lift left side of shelf slightly, swing shelf up, ¿WULJKWHQGVRIVKHOILQWRKROHVLQFDELQHW wall, and lower shelf into place. 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64

About the temperature control dial.
About the freezer compartment shelves.
Step Shelf
To remove the step shelf:
Lift left side of shelf slightly.
Move shelf to the left to free its right ends
from holes in the cabinet wall.
Lower right side of shelf, move shelf to the
right and take it out.
To replace the step shelf:
shelf into holes in cabinet wall.
Lift left side of shelf slightly, swing shelf up,
wall, and lower shelf into place.
1
2
3
4
About the fresh food compartment shelves.
Full-Width Shelves
Some models have a stationary tempered glass
shelf, a spillproof shelf or two steel wire stationary
shelves. These shelves can be moved to another
place in the fresh food compartment.
When placed correctly on the shelf supports, the
shelf will stop before coming completely out of
the refrigerator and will not tilt when you place
food on it or remove food from it.
Shelf supports at various levels allow you to custom-space your shelves. Not all features are on all models.
Half-Width Shelves
One end of the shelf rests on a molded side-wall
track on the rear cabinet wall.
support and out of the track.
To replace, select desired shelf height. With shelf front
raised slightly, hook the bracket’s top lug into the track,
then lower the shelf onto the support.
NOTE:
The shelf to the right of the track is
shelf to the left is designed to hook into the left-
hand slot.
2
Lift up and out
1
Tilt up
Pull forward
To remove the full-width shelves
Spillproof Shelves
Spillproof shelves have special edges
to help prevent spills from dripping
to lower shelves. To remove or replace
the shelves, see the above instructions.
Turning the dial to
to the refrigerator.
Temperature Control Dial
The temperature control dial adjust refrigerator from warmest to coldest.
The recommended factory setting is shown in illustration to the left. For colder temperature
OFF
OFF
OFF
Recommened
factory setting
Coldest setting
Warmest
setting
OFF