GE GTK17GBEBS Use and Care Manual - Page 5

About the storage drawers. GEAppliances.com Not all features are on all models. Snacks Drawer The snacks drawer can be moved to the most useful location for your family's needs. Fruit and Vegetable Drawers Excess water that may accumulate in the bottom of the drawers should be emptied and the drawers wiped dry. About storage drawer and cover removal. Not all features are on all models. Adjustable Humidity Drawer RQVRPHPRGHOV Slide the control all the way to the HIGH setting to provide high humidity recommended for most vegetables. Slide the control all the way to the LOW setting to provide lower humidity levels recommended for most fruits. Drawer and Cover Removal Drawers can be removed easily by grasping the sides and lifting up slightly while pulling drawers past the stop location. To remove the cover,OLIWLWRȺLWVVXSSRUWV pull it forward, tilt it and take it out. Twin Drawer Shelf To remove: Remove the drawers. Reach in, push the front of glass cover up, and at the same time, pull it forward as far as it will come. Tilt it and take it out. Avoid cleaning the cold glass cover with hot water because the extreme WHPSHUDWXUHGLȺHUHQFHPD\FDXVHLWWREUHDN 5HPRYHWKHGUDZHUIUDPH$OZD\VUHPRYH the glass cover before you take out the drawer frame.) /LIWWKHIUDPHRȺWKHVXSSRUWVDWHDFKVLGHDQG back, pull it forward, tilt it and take it out. To replace: Lower the frame until it rests on the supports at each side and back. Replace the glass cover, pushing its rear HGJH¿UPO\LQWRWKHUHDUIUDPHFKDQQHODQG gently lowering the front into place. Replace the drawers. About the automatic icemaker A newly-installed refrigerator may take 12-24 hours to begin making ice. Icemaker Automatic Icemaker RQVRPHPRGHOV  The icemaker will produce approximately 70-100 cubes. in a 24-hour period, depending on the freezer compartment temperature, room temperature, number of door openings and other ON OFF use conditions. Feeler Arm Power Switch If the refrigerator is operated before the water connection is made to the icemaker, set the switch OFF or move the feeler arm to the STOP XS SRVLWLRQ When the refrigerator has been connected to the water supply, set the switch ON position or move the feeler arm to the ON GRZQ SRVLWLRQ 7KHLFHPDNHUZLOO¿OOZLWKZDWHUZKHQLWFRROVWR 15°F. A newly-installed refrigerator may take 12 to 24 hours to begin making ice cubes. Feeler Arm in the STOP Feeler Arm in the XS SRVLWLRQ ONGRZQ SRVLWLRQ Once the icemaker starts to make ice, it may take XSWRKRXUVWR¿OOWKHELQGHSHQGLQJRQWKH temperature settings and number of door openings. You will hear a buzzing sound each time the LFHPDNHU¿OOVZLWKZDWHU 7KURZDZD\WKH¿UVWIHZEDWFKHVRILFHWRDOORZ the water line to clear. Be sure nothing interferes with the sweep of the feeler arm. :KHQWKHELQ¿OOVWRWKHOHYHORIWKHIHHOHUDUPWKH icemaker will stop producing ice. It is normal for several cubes to be joined together. If ice is not used frequently, old ice cubes will become cloudy, taste stale, shrink or fuse together. Icemaker accessory kit: If your refrigerator did not already come equipped with an automatic icemaker, an icemaker accessory kit is available at extra cost. &KHFNWKHEDFNRIWKHUHIULJHUDWRUIRUWKHVSHFL¿F icemaker kit needed for your model. 5