GE GTL18JCPBS Use and Care Manual - Page 5

Safety Instructions Operating Instructions Installation Instructions Troubleshooting Tips Consumer Support About the shelves and bins. Not all features are on all models. Rearranging the Shelves Refrigerator Compartment To remove: Tilt the shelf up at the front. Lift the shelf up at the back and bring the shelf out. Some models have wire shelves that can be adjusted in the same manner. To replace: GEAppliances.com While tilting the shelf up, insert the top hook at the back of the shelf in a slot on the track. Lower the front of the shelf until the bottom of the shelf locks into place. Freezer Compartment To remove: Lift and slide left. Rotate up and out. To replace: Holding the shelf diagonally, insert the left end of the shelf into the center of the shelf supports on the side wall. Insert the right end of the shelf into the shelf supports on the side wall. Rest each end of the shelf on the bottom of the shelf supports. Tab Opening Front bar Slide-Out Spillproof Shelf (on some models) The slide-out spillproof shelf allows you to reach items stored behind others. The special edges are designed to help prevent spills from dripping to lower shelves. NOTE: The shelves are shipped with tape on the back. Remove this tape before attempting to remove the shelf. To remove: Remove all items from shelf. To replace: Place the rear of the shelf on the shelf frame just behind the front bar. Slide the shelf back until the tabs are above the openings. Lower the shelf so that the tabs go into the openings; then slide the shelf all the way in. Make sure that the shelf sits flat after reinstallation and doesn't move freely from side to side. Slide the shelf out until it stops. Lift the front edge of the shelf until the tabs are above the shelf frame. Make sure you push the shelves all the way in before you close the door. Continue pulling the shelf forward until it can be lifted out and removed. Adjustable Bins on the Door (on some models) Adjustable bins can easily be carried from refrigerator to work area. To remove: To replace or relocate: Lift bin straight up; then pull out. Engage the bin in the molded supports of the door and push down. Bin will lock in place. NOTE: Bins for the refrigerator and freezer doors are different sizes and are not interchangeable. Non-Adjustable Shelves on the Door Detachable shelves deepen and enclose fixed door shelves, providing more storage room and greater storage flexibility. To remove: Lift the shelf straight up; then pull out. To replace: Engage the shelf extender in the molded supports on the door and push down. It will lock in place. Freezer Tilt-Out Bin (on some models) Push the button as you tilt out the bin. To remove: Hold the sides of the bin and lift it straight up; then pull out. To replace: Engage the ends of the bin in the molded supports on the door and push down. It will lock in place. NOTE: Do not overload the bin. 5