GE GTS18IBRCC Use and Care Manual - Page 14
Reversing the Door Swing, IMPORTANT NOTES, TOOLS YOU WILL NEED, PLUG IN THE REFRIGERATOR
UPC - 084691165347
View all GE GTS18IBRCC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Installation Instructions INSTALLING THE WATER LINE (CONT.) 9 PLUG IN THE REFRIGERATOR Arrange the coil of tubing so that it does not vibrate against the back of the refrigerator or against the wall. Push the refrigerator back to the wall. START THE ICEMAKER On power switch models, set the icemaker power switch to the l (on) position. On feeler arm models, move the feeler arm to the ON (down) position. The icemaker will not begin to operate until it reaches its operating temperature of 15°F (-9°C) or below. It will then begin operation automatically. Feeler Arm in the STOP (up) position Feeler Arm in the ON (down) position NOTE: In lower water pressure conditions, the water valve may turn on up to 3 times to deliver enough water to the icemaker. REVERSING THE DOOR SWING IMPORTANT NOTES When reversing the door swing: • Read the instructions all the way through before starting. • Handle parts carefully to avoid scratching paint. • Set screws down by their related parts to avoid using them in the wrong places. • Provide a non-scratching work surface for the doors. IMPORTANT: Once you begin, do not move the cabinet until door-swing reversal is completed. These instructions are for changing the hinges from the right side to the left side-if you ever want to change the hinges back to the right side, follow these same instructions and reverse all references to left and right. Unplug the refrigerator from its electrical outlet. Empty all door shelves, including the dairy compartment. TOOLS YOU WILL NEED Phillips screwdriver 3/8″ Head socket driver (a 6-point socket is recommended) Masking tape T20 or T25 Torx® driver, whichever your model requires Putty knife or thin-blade screwdriver 14