GE GTS18IBRCC Use and Care Manual - Page 6

Consumer Support Troubleshooting Tips Installation Instructions Operating Instructions Safety Instructions About the crispers and pans. Not all features are on all models. Fruit and Vegetable Crispers Excess water that may accumulate in the bottom of the drawers or under the drawers should be wiped dry. Snack Pan (on some models) This pan can be moved to the most useful location for your family's needs. Adjustable Humidity Crisper (on some models) Slide the control all the way to the HIGH setting to provide high humidity recommended for most vegetables. Slide the control all the way to the LOW setting to provide lower humidity levels recommended for most fruits. Removing the glass cover Crisper Removal Unload the bottom shelf before attempting to remove the storage drawers. To Remove: Lift the drawers up slightly while pulling them past the stop location. If the door prevents you from taking out the drawers, first try to remove the door bins. If this does not offer enough clearance, the refrigerator will need to be rolled forward until the door opens enough to slide the drawers out. In some cases, when you roll the refrigerator out, you will need to move the refrigerator to the left or right as you roll it out. To remove the glass cover: Remove the glass, then the frame. When replacing the glass, push the front edge firmly into the frame. Lift the back up off of its supports, slide it backward, tilt it and take it out. To remove the frame: Lift the front of the frame, pull it forward, tilt it and take it out. About the additional features. Not all features are on all models. ShelfSaver™ Rack This slide-out rack holds twelve cans of soda or two wine/water bottles (lengthwise). Can be removed for cleaning. To remove, slide the rack out to the stop position, lift the rack up and past the stop, and lift out. 6