GE GTW330ASKWW Installation Instructions - Page 21

GEAppliances.com OPERATION Residual powder in dispenser or clogging of dispensers (on some models) Laundry additives dispensing too soon (Dispensers on some models) Washer pauses during spin cycle Washer won't operate Detergent packets not dissolving Unexplained time and/ or settings changes Basket seems loose Possible Causes Wash water too cold or low home water pressure Overfilling of dispensers This is normal Washer is unplugged Water supply is turned off /LGLVRSHQ³VDIHW\IHDWXUH prevents agitation and spinning when lid is up Circuit breaker/fuse is tripped/blown Electronics need to be reset Start was not pressed Laundry detergent packet placed in dispenser Changing options (on some models) Basket moves or rotates freely What To Do Select a warmer wash temperature if possible to improve dissolving of detergent or use liquid detergent. Make sure siphon caps are free of debris and fully pressed into position. Remove and clean tray if clogging occurs. Do not overfill or add water to dispenser. Select Deep Rinse option when using fabric softener. The washer may pause during the spin cycle to remove soapy water more efficiently. Make sure cord is plugged securely into a working outlet. Turn both hot and cold faucets fully on. Close lid and press Start. Check house circuit breakers/fuses. Replace fuses or reset breaker. Washer should have a separate outlet. Unplug washer, wait 2 minutes, plug back in and press Start. Press Start. Laundry detergent packets should not be used in the dispensers. They should only be added directly to the wash basket following the manufacturer's directions. This is normal. Several options will change other options to maximize washer performance. Washer basket does not have a traditional brake. Washer basket will move freely. This is normal. 21