GE JB700DNWW Use and Care Manual - Page 7

Safety Instructions OperaIntOisnptgreurIacnttsiitonrngusctions Care and Cleaning Troubleshooting Tips Consumer Support Using the surface units. (on some models) GEAppliances.com WARNING FIRE HAZARD: Never leave the range unattended with the cooktop on medium or high settings. Keep flammable items away from the cooktop. Turn off all controls when done cooking. Failure to follow these instructions can result in fire, serious injury or death. Throughout this manual, features and appearance may vary from your model. At both OFF and HI the control clicks into position. You may hear slight clicking sounds during cooking, indicating the control is maintaining your desired setting. Be sure you turn the control knob to OFF when you finish cooking. How to Set Push the knob in and turn in either direction to the setting you want. For glass cooktop surfaces: A HOT COOKTOP indicator light will glow when any radiant element is turned on, and will remain on until the surface is cooled to approximately 150°F. Indicator light will: ■ come on when the unit is turned on or hot to the touch. ■ stay on even after the unit is turned off. ■ glow until the unit is cooled to approximately 150°F. For coil cooktop surfaces: A surface unit ON indicator light will glow when any surface unit is on. The WM (warm) setting (on some models) on the right REAR surface unit keeps already heated food warm until ready to serve. Dual and Triple Surface Units and Control Knobs (on some models) The surface unit has 2 or 3 cooking sizes to select from so you can match the size of the unit to the size of the cookware you are using. BURNER SIZE 9" 6" 12" OFF On some models. Models with a Tri-Ring surface element only. On some models. 7