GE JGB690SEFSS Use and Care Manual - Page 24
Maintenance Cont.
View all GE JGB690SEFSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
CARE AND CLEANING: Maintenance Maintenance (Cont.) Lift-Off Oven Door The door is very heavy. Be careful when removing and lifting the door. Do not lift door by the handle. If improperly removed, oven door hinges may suddenly open and can cause personal injury WARNING to appendages near the hinge. Follow instructions below to avoid a risk of injury when removing and re-installing the oven door. To Remove the Door: 1. Fully open the oven door. 2. On each hinge, slide the hinge lock up, making sure it snaps into its fully raised position. 3. Firmly grasp both sides of the door at near the top. 4. Close door until the top of the door is approximately 3" from the range frame. 5. Lift door up and away from the range until both hinge arms are clear of the slots in the range frame. To Replace the Door: 1. Firmly grasp both sides of the door near the top. 2. With the door at the same angle as the removal position, rest the notch in the bottom of the left hinge arm on the bottom edge of the left hinge slot. The notch in the hinge arm must be fully seated onto the bottom of the slot. Repeat for the right side. 3. Fully open the door. If the door will not fully open, the notches in the bottoms of the hinge arms are not seated correctly onto the bottom edge of the slot. Lift the door off the range and repeat Step 2. 4. Push the hinge locks down to the locked position 5. Close the oven door. Pull hinge locks up to unlock Notch Removal position Push hinge locks down to lock 24 49-85214-1