GE JGP963 Installation Instructions - Page 1

Installation 36″ Sealed Gas Cooktop Instructions JGP628, JGP962, JGP963, ZGU36 Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: www.GEAppliances.com In Canada, call 1.800.361.3400 or Visit our Website at: www.geappliances.ca IN THE COMMONWEALTH OF MASSACHUSETTS: • This product must be installed by a licensed plumber or gas fitter. • When using ball-type gas shut-off valves, they shall be the T-handle type. • A flexible gas connector, when used, must not exceed 3 feet. BEFORE YOU BEGIN Read these instructions completely and carefully. • IMPORTANT - Save these instructions for local inspector's use. • IMPORTANT - Observe all governing codes and ordinances. • Note to Installer - Be sure to leave these instructions with the Consumer. • Note to Consumer - Keep these instructions for future reference. • Product failure due to improper installation is not covered under the Warranty. WARNING - This appliance must be properly grounded. • IMPORTANT - Leak testing of the appliance shall be conducted according to the manufacturer's instructions. • Proper installation is the responsibility of the installer and product failure due to improper installation is NOT covered under warranty. PARTS INCLUDED 2 Screws Foam Tape (Glass Top Models Only) 2 Hold Down Brackets MATERIALS YOU MAY NEED Joint Sealant Pipe Fittings Shut Off Valve CSA-Approved Flexible Gas Line 3/8″ Min. ID, 1/2″ NPT Connection, 3-foot Maximum Length (Massachusetts Only) TOOLS YOU WILL NEED Pencil Phillips Head Screwdriver Ruler or Straightedge Saber Saw Pipe Wrench Safety Glasses 1/8″ Drill Bit & Electric or Hand Drill 229C4053P522-2 31-10539-2 05-03 JR 1