GE JGRP20SENSS Use and Care Manual - Page 6

Using the oven controls. Safety Instructions Operating Instructions Troubleshooting Tips Oven Control, Clock and Timer Features and Settings BAKE Pad START Pad Touch this pad to select the bake function. Must be touched to start any cooking BAKE Light Flashes while in edit mode-you can change function. - Pad the oven temperature at this point. Glows Short taps to this pad will decrease the time when the oven is in bake mode. or temperature by small amounts. Touch BROIL HI/LO Pad Touch this pad to select the broil function. BROIL Light Flashes while in edit mode-you can switch from HI to LO BROIL at this point. Glows when the oven is in broil mode. and hold the pad to decrease the time or temperature by larger amounts. + Pad Short taps to this pad will increase the time or temperature by small amounts. Touch and hold the pad to increase the time or temperature by larger amounts. Display Shows the operations you have selected, the time of day and the cooking status. CLEAR/OFF Pad Touch this pad to cancel ALL oven operations except the clock and timer. COOKING TIME Pad Touch this pad and then touch the + or - pad to set the amount of time you want your food to cook. The oven will shut off when the cooking time has run out. DELAY START Pad Use along with the COOKING TIME or SELF CLEAN pad to set the oven to start and stop automatically at a time you set. SELF CLEAN Pad Touch this pad to select the self-cleaning function. See the Using the self-cleaning oven section. CLEAN Light Flashes while in edit mode-you can change the length of time for the self-clean cycle at this point. Glows when the oven is in the selfclean cycle. After the self-clean cycle, the OVEN LIGHT ON/OFF Pad light will turn off. Unlatch the door. Touch this pad to turn the oven light on or off. If "F-" and a number or letter flash in the display and the oven control signals, this indicates a function error code. TIMER/CLOCK Pad Touch this pad to select the timer feature. Touch the CLEAR/OFF pad. Allow the oven to cool for one hour. Put the oven back into operation. Then touch + and - pads to adjust time. To set the clock, touch this pad twice and If function error code repeats, disconnect power to the oven and call for service. hold 3 seconds and then touch the + and - pads. The time of day will flash in the 6 display when the oven is first turned on. Consumer Support