GE JGRP20SENSS Use and Care Manual - Page 9

Safety Instructions Operating Instructions GEAppliances.com 12-Hour, 24-Hour or Clock Black-Out Your control is set to use a 12-hour clock. If you would prefer to have a 24-hour military time clock or black-out the clock display, follow the steps below: Touch the BAKE and BROIL HI/LO pads at the same time for 2 seconds until the display shows SF. Touch the TIMER/CLOCK pad once. The display will show 12 hr. Touch the TIMER/CLOCK pad again to change to the 24-hour military time clock. The display will show 24 hr. Touch the TIMER/CLOCK pad again to black-out the clock display. The display will show OFF. Touch the START pad to activate your choice and leave the control set in this special features mode. NOTE: If the clock is in the black-out mode you will not be able to use the Delay Start function. Control Lockout Your control will allow you to lock out the touch pads so they cannot be activated when touched. To lock the controls: Touch the BAKE and BROIL HI/LO pads at the same time for 2 seconds until the display shows SF. Touch the SELF CLEAN pad. The display will show LOC OFF. Touch the SELF CLEAN pad again. The display will show LOC. Touch the START pad to activate the control lockout feature and leave the control set in this special features mode. When this feature is on and the touch pads are touched the control will beep and the display will show LOC. NOTE: The control lockout mode will not affect the clock, timer and oven light touch pads. Fahrenheit or Centigrade Temperature Selection Your oven control is set to use the Fahrenheit temperature selections but you may change this to use the Centigrade selections. Touch the BAKE and BROIL HI/LO pads at the same time for 2 seconds until the display shows SF. Touch the BROIL HI/LO and COOKING TIME pads at the same time for 2 seconds. The display will show F (Fahrenheit). Touch the BROIL HI/LO and COOKING TIME pads again at the same time for 2 seconds. The display will show C (Centigrade). Touch the START pad. Troubleshooting Tips Consumer Support Changing the Speed of the +/- Pads As you use the +/- pads when setting a time or temperature, you may notice the display changes slowly. This special feature allows you to change the speed. To set the speed you prefer, follow the steps below: Touch the BAKE and BROIL HI/LO pads at the same time for 2 seconds until the display shows SF. Touch the + pad. The display will show you a set speed between 1 and 5. Touch the + pad to increase the speed up to the number 5. Touch the - pad to decrease the speed down to the number 1. Touch the START pad to activate the setting and leave the control set in this special features mode. 9