GE JT3000SFSS Installation Instructions - Page 2

2 A CUTOUT FOR SINGLE OVENS IN WALL CABINET NOTE: If the cabinet does not have a front frame and the sides are less than ¾" (1.9 cm) thick, shim both sides equally to establish the cutout width. H These ovens are not approved for stackable installations. Junction Box Location B (junction box may be located in adjacent cabinet) Opening Between Inside Walls Must be at Least 28-1/2" (72.4 cm) Wide D 22" (55.9 cm) Min. to Bottom of Junction Box F C G E Cutout Depth 23-1/2" (59.7 cm) Min. Side-by-Side Installations Install two ovens in separate cutouts. Center Line Center Line 30.5" (77.5 cm) 30" models 27" (68.58 cm) 27" models Cutout - observe all dimensions and requirements. Cutout - observe all dimensions and requirements. 2" (5.1 cm) Min. Note: Allow 1/4" (0.64 cm) clearances from side edges of oven door. Dimension Dimension Description 27" Single Oven A Cabinet Width 27" (68.6 cm) B Cutout Width 25" (63.5 cm) min. 251⁄4" (64.1 cm) max. C Cutout Height 275⁄8" (70.2 cm) min. 281⁄8" (71.4 cm) max. D Overlap of Oven Over Side Edges of Cutout 1" (2.5 cm) E Clearance to Adjacent Corners, Drawers, Walls, etc., When Door Is Open 23" (50.8 cm) min. F Overlap of Oven 1" (2.5 cm) min. Top of Cutout G Overlap of Oven Bottom of Cutout 1" (2.5 cm) min. H Junction Box Location 83⁄4" (22.2 cm) max. right side only Recommended Cutout Location from Floor 32-1/2" (82.6 cm) A 30" Single Oven 30" (76.2 cm) 281⁄2" (72.4 cm) min. 285⁄8" (72.7 cm) max. 271⁄4" (69.2 cm) min. 275⁄16" (69.4 cm) max. 11⁄16" (1.75 cm) 23" (53.3 cm) min. 1" (2.5 cm) min. (11⁄4" (3.2 cm) for PT9050) 11⁄4" (3.2 cm) 91⁄2" (24.1 cm) max. right side only 2 B CUTOUT FOR SINGLE OVENS - UNDER COUNTER NOTE: These ovens are only approved to be installed under the specific models as labeled on the unit. Side-by-Side Installations Install two ovens in separate cutouts. Center Line Center Line 30.5" (77.5 cm) 30" models 27" (68.58 cm) 27" models Cooktop Cutout - observe all dimensions and requirements. Cutout - observe all dimensions and requirements. 2" (5.1 cm) Min. NOTE: One cooktop may be centered over either oven in the side-by-side installation. Dimension Dimension Description 27" Single Oven A Cabinet Width 25" (63.5 cm) min. 251⁄4" (64.1 cm) max. B Cutout Height 275⁄8" (70.2 cm) min. 281⁄8" (71.4 cm) max. C Unit Overlap Top 1" (2.5 cm) D Unit Overlap Bottom 1" (2.5 cm) E Unit Overlap Side Edges 1" (2.5 cm) F Junction Box Location 83⁄4" (22.2 cm) max. right side only Continue to Section 4. 30" Single Oven 281⁄2" (72.4 cm) min. 285⁄8" (72.7 cm) max. 271⁄4" (69.2 cm) min. 275⁄16" (69.4 cm) max. 1" (2.5 cm) (11⁄4" (3.2 cm) for PT9050) 11⁄4" (3.2 cm) 11⁄16" (1.75 cm) 91⁄2" (24.1 cm) max. right side only