GE PDWT180RSS Installation Instructions - Page 10

Dishwasher Installation STEP 11 - INSERT DRAIN HOSE THROUGH CABINET • Position dishwasher in front of cabinet opening. Insert drain hose into the hole in cabinet side. If a power cord is used, guide the end through a separate hole. Maximum Drain Hose Length 10' Insulation Blanket Water Line STEP 12 - SLIDE DISHWASHER THREEFOURTHS OF THE WAY INTO CABINET IMPORTANT - DO NOT PUSH AGAINST FRONT PANEL WITH KNEES. DAMAGE WILL OCCUR. • Grasp the dishwasher by its sides and slide it into the opening a few inches at a time. Drain Hose House Wiring (If Power Cord is NOT Used) Power Cord (If Used) Figure R Tip: Position water line and house wiring on the floor to avoid interference with base of dishwasher. 3^
=^c
?dbW
0VPX]bc 5a^]c
3^^a
?P]T[
FXcW :]TT
3P\PVT
c^
CWT 3^^a
?P]T[
FX[[
>RRda

Figure S • As you proceed, pull the drain hose through the opening under the sink. Stop pushing when the front of the dishwasher is a few inches forward of adjacent cabinets. • Make sure drain hose is not kinked under the dishwasher and there is no interference with the water line, wiring or any other component. Tip: Make sure the dishwasher will fit in the cabinet. Check to be sure the power cable, drain hose and hot water line are not trapped behind the dishwasher. Utility lines trapped behind the dishwasher prevent the dishwasher from being pushed fully into the enclosure. 10