GE PP989TNWW Use and Care Manual - Page 22

INsTAllING The COOKTOP, CAuTION, CheCKING fOR flATNess, NsTAllING The OPTIONAl, INsTAllATION BRACKeTs

Page 22 highlights

Installation Instructions INstalling the cooktop 9 Installing the Cooktop CAUTION: Do not lift from vent opening. 10 Checking for Flatness Inspect the cooktop glass for rocking or uneven gap on all four sides at the countertop surface. Do not attempt to force the glass to meet the countertop. Lift the cooktop by the glass side edges as shown. NOTE: Do not use the glass top vent opening to lift or move the cooktop into position. Lower the cooktop into the countertop opening, guiding it into position. Glass is fragile-do not allow it to drop onto the countertop. Support from the underside and lower slowly. Carefully remove your fingers one corner at a time to lower the cooktop into position. NOTE: Do not use Silicone RTV or caulk to bond cooktop glass to countertop. Check for uneven gaps 11 Installing the optional installation brackets NOTE: Check for glass flatness in Step 10 before installing optional installation brackets. Cooktop Optional installation bracket and thumbscrew (not included) Countertop Screws supplied with cooktop Thumbscrew To order optional installation brackets/thumbscrews, call the National Parts Center at 800.626.2002. Order two of each part: WB02X11331 Bracket WB01X10353 Screw To install optional installation brackets: Remove 2 screws on both sides under cooktop. Align optional installation bracket under cooktop and reinstall screws through the slot in the bracket. Do this on both sides of the cooktop. Thread the thumbscrew through the hole in the bracket and tighten to secure the cooktop to the countertop. Repeat on the other side. IMPORTANT: Turn thumbscrew until it touches the bottom of the countertop. Do not overtighten. 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64

22
INsTAllING The COOKTOP
INsTAllING The COOKTOP
Lift the cooktop by the glass side edges as shown°
NOTe:
Do not use the glass top vent opening to lift
or move the cooktop into position°
Lower the cooktop into the countertop opening,
guiding it into position° Glass is fragile—do not allow
it to drop onto the countertop° Support from the
underside and lower slowly°
Carefully remove your fingers one corner at a time
to lower the cooktop into position°
NOTe: Do not
use Silicone RTV or caulk to bond
cooktop glass to countertop°
CheCKING fOR flATNess
Inspect the cooktop glass for rocking or uneven
gap on all four sides at the countertop surface°
Do not attempt to force the glass to meet
the countertop°
Check for
uneven gaps
CAuTION:
DO NOT lIfT
fROm VeNT
OPeNING.
9
10
InStaLLation InStrUctionS
I
NsTAllING The OPTIONAl
INsTAllATION BRACKeTs
NOTe:
Check for glass flatness in Step 10 before
installing optional installation brackets°
To order optional installation brackets/thumbscrews,
call the National Parts Center at 800°626°2002°
Order two of each part: WB02X11331 Bracket
WB01X10353 Screw
To install optional installation brackets:
Remove 2 screws on both sides under cooktop°
Align optional installation bracket under cooktop
and reinstall screws through the slot in the bracket°
Do this on both sides of the cooktop°
Thread the thumbscrew through the hole
in the bracket and tighten to secure the cooktop
to the countertop° Repeat on the other side°
ImPORTANT:
Turn thumbscrew until it touches
the bottom of the countertop° Do not overtighten°
Optional installation
bracket and
thumbscrew (not
included)
Cooktop
Countertop
11
Screws supplied
with cooktop
Thumbscrew