GE PZS23KSESS Use and Care Manual - Page 20
Replacing the light bulbs.
View all GE PZS23KSESS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Replacing the light bulbs.(on some models) NOTE: Turning the refrigerator off via the controls on the touch panel does not shut off electrical power to the refrigerator or to the light circuit. Your light shield will look like one of the following: Tabs OR Pocket 5HIULJHUDWRU&RPSDUWPHQW³8SSHU/LJKW Unplug the refrigerator. After replacing the bulb with an appliance The bulbs are located at the top of the compartment, inside the light shield. On some models, a screw at the front of the light shield will have to be removed. On other models, the screw is located in the pocket located at the back of the light bulb of the same or lower wattage, replace the light shield and screws (on some models). When replacing the light shield, make sure that the tabs at the back of the shield fit into the slots at the back of the light shield housing. shield. Plug the refrigerator back in. To remove the light shield, on some models, press in on the tabs on the sides of the shield and slide forward and out. On other models, just slide the shield forward and out. COLD 5HIULJHUDWRU&RPSDUWPHQW³/RZHU/LJKW This light is located above the top drawer. After replacing the bulb with an appliance OLDEST Unplug the refrigerator. C bulb of the same or lower wattage, replace the shield and the knob. Remove the convertible meat drawer control knob by pulling straight out. Plug the refrigerator back in. Lift the light shield up and pull it out. Freezer Compartment Unplug the refrigerator. Remove the shelf just above the light shield. (The shelf will be easier to remove if it is emptied first.) On some models, a screw at the top of the light shield will need to be removed. To remove the light shield, press in on the sides, and lift up and out. Replace the bulb with an appliance bulb of the same or lower wattage, and reinstall the light shield. When reinstalling the light shield, make sure the top tabs snap securely into place. Replace the screw (on some models). Reinstall the shelf and plug the refrigerator back in. Dispenser (on some models) Unplug the refrigerator. The bulb is located on the dispenser under the control panel. Remove the light bulb by turning it counterclockwise. Replace the bulb with a bulb of the same size and wattage. Plug the refrigerator back in. LED Lighting Display Refrigerator Compartment (on models with LED lighting) Some models may have LED lighting display on the top and/or sides of the fresh food compartment and in the rear and side of the freezer compartment If this assembly needs to be replaced, call GE Service at 1.800.432.2737 in the United States or 1.800.561.3344 in Canada. LED Lighting Display 20