GE PZS23KSESS Use and Care Manual - Page 7

About CustomCool.™(on some models) GEAppliances.com How it Works Touch LED Dispenser Control The CustomCool™ feature is used to quickly chill items, thaw items or hold the pan at a specific temperature. This feature is a system of dampers, a fan, a temperature thermistor and a heater. The pan is tightly sealed to prevent temperature fluctuations in the rest of the refrigerator. The controls for this pan are located on the dispenser with the temperature controls. ExpressThaw™ ExpressChill ™ How to Use Empty the pan. Place the Chill/Thaw tray in the pan. Place the items on the tray and close the pan completely. Touch LED Dispenser Control: Select the ExpressThaw™, ExpressChill™ or SelectTemp™ pad. The display and SET light will come on. Tap the pad until the light appears next to the desired setting. Use the following chart to determine the best setting to use. „ ExpressChill can be set to 15, 30 or 45 minutes. The default is 15 minutes. „ To stop a feature before it is finished: tap that feature's pad until no options are selected and the display is off. „ During ExpressThaw and ExpressChill, the display on the controls will count down the time in the cycle (on some models). „ After the ExpressThaw cycle is complete, the pan will reset to the MEAT setting (32°F [0°C]) to help preserve thawed items until they are used. „ The displayed actual temperature of the CustomCool pan may vary slightly from the SET temperature based on usage and operating environment. NOTE: For food safety reasons, it is recommended that foods be wrapped in plastic wrap when using ExpressThaw. This will help contain meat juices and improve thawing performance. 7