GE RM24927 Instruction Manual - Page 12

Programming For Second Device If you have not programmed the AUDIO•AUX button for audio components, you can assign a second TV, DVD, CD player, VCR, Satellite System, or Cable Box to it. 1. Manually turn on the device you wish to control. Find the three digit code for the device you wish to program in the code list. 2. Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button. 3. Press and release the AUX button (The INDICATOR LIGHT will blink then remain lit.) CODE SEARCH INDICATOR LIGHT AUX (BLINK) 123 4. Enter the code using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off. If the code is not valid, the INDICATOR LIGHT will blink. Check the code list and repeat process. 5. Aim the remote at the device you wish to control and press the ON•OFF button. The device should turn off. 4 56 7 89 0 (OFF) ON•OFF CHAN + ON•OFF OR AUX CODE TV VCR CABLE DBS 6. With your device CD RCVR LD DVD on, press CHAN+ (CHANNEL UP) or ON•OFF button. If the device responds, no further programming is required. NOTE: If your device does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method. 7. Enter your code and the type of device you programmed here for easy reference. 11