GE RM24927 Instruction Manual - Page 8

Programming For DVD Most GE, RCA and ProScan DVD systems will not require programming. Check to see if your DVD system responds to the remote before you begin programming. 1. Manually turn on the DVD system. Find the three digit code for your DVD system in the code list below. 2. Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button. 3. Press and release the DVD button (The INDICATOR LIGHT will blink then remain lit. 4. Enter the code using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off. If the code is not valid, the INDICATOR LIGHT will blink. Check the code list and repeat process. CODE SEARCH INDICATOR LIGHT DVD (BLINK) 123 4 56 7 89 0 (OFF) ON•OFF 5. Aim the remote at your DVD system and press the ON•OFF button. Your DVD system should turn off. DVD CODE 6. If the DVD System responds, no further programming is required. NOTE: If your DVD does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method. 7. Enter your code here for easy reference. CODE LIST 7