GE RM24927 Instruction Manual - Page 9

Programming For DBS Satellite System Most GE, RCA and ProScan Satellite systems will not require programming. Check to see if your DBS Satellite system responds to the remote before you begin programming. 1. Manually turn on the DBS system. Find the three digit code for your DBS system in the code list below. 2. Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button. 3. Press and release the DBS button (The INDICATOR LIGHT will blink then remain lit. 4. Enter the code using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off. If the code is not valid, the INDICATOR LIGHT will blink. Check the code list and repeat process. CODE SEARCH INDICATOR LIGHT SAT (BLINK) 123 4 56 7 89 0 (OFF) ON•OFF CHAN + 5. Aim the remote at your DBS system and press the ON•OFF button. Your DBS system should turn off. SATELLITE CODE 6. With your DBS System on, press CHAN+ (CHANNEL UP). If the satellite system responds, no further programming is required. NOTE: If your DBS system does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method. 7. Enter your code here for easy reference. 8