GE asd06lk Owners Manual - Page 11

Window mnstamiation mnsttuctions [] WINDOW REQUIREMENTS • These instructions are for a standard double-hung window. You will need to modify them for other types of windows. • All supporting parts must be secured to firm wood, masonry or metal. • The electrical outlet must be within reach of the power cord. Models ASD06, ASM08, ASQ10, ASVl0 only (See below illustration for Models ASM10, ASM12, ASQ12, ASV12, ASQ14, ASV14.) 143A"min. fl- 243/4" to 36" (With accordion panels) Models ASM10, ASM12, ASQ12, ASV12, ASQ14, ASV14 only (Seeabove illustration for Models ASD06, ASM08,ASQ10,ASVl0.) 1 l 16¼" min. 26" to 39W' (With accordion panels) [] STORM WINDOW REQUIREMENTS A storm window frame will not allow the air conditioner to tilt toward the outside, and will keep it from draining properly. To adjust for this, attach a piece of wood to the stool. WOOD PIECES- WIDTH: 2" LENGTH: Long enough to fit inside the window frame. THICKNESS: To determine the thickness, place a piece of wood on the stool to make it 1/2" higher than the top of the storm window frame or the vinyl frame. Attach securely with nails or screws provided by the installer. 1/2" higher than storm window 1/2" higher than vinyl frame / L (on ll! ___ _ _- r _-1"1_ II some windows) --Wood f"_l Jr b"/._ 1[L1" / _1 frame __tool Storm window frame /- S _' • Vinyl frame I I [] REMOVE THE FRONT GRILLE (IF ATTACHED) [] Remove shipping tape, if present. On models with a raise-up inlet grille, lift it and remove the screw behind it (if present) that holds the grille in place. On models with a slide-out air filter, remove it and the screw behind it (if present) that holds the grille in place. [] Gently but firmly grasp the lower grille corners, press in on the case sides and pull forward to release. !itt NOTE: Do not pull the bottom edge toward you more than 3" or you may damage the tabs of the grille, [] Lift the grille up and off the top tabs. 11