Gigabyte 3D Mercury User Manual - Page 15

English power connector on the motherboard to complete the installation 4-6 Installation of 5.25" Front Device Bay 4-6-1 Open the side panel of the case and remove the mesh drive rail and metal EMI plate of the chassis. LOCK 4-6-2 Slide in the 5.25" device into the drive bay from the front of the chassis and level it with the other mesh drive rails. 4-6-3 Secure the 5.25" device with the internal latch. Refer to the figure for installation procedure. 4-7 Installation of 3.5" Front Device Bay Installation of the 3.5" front device is the same as the 5.25" front devices. Please refer to step 4-6. 4-8 Installation of 3.5" Internal Device Bay The 3D Mercury provides built-in bays to accommodate up to 5 hard disc drives (after removal of the tool enclosure). The built-in HDD requires securing runners which can be found in the black tool enclosure. Required Tools: Securing runners (2 per hard disc drive) 4-8-1 Fit the securing runners on both sides of the HDD and slide the HDD into the internal drive bay. 15