Gigabyte 3D Mercury User Manual - Page 26
GIGABYTE Blue Eye VGA Liquid
View all Gigabyte 3D Mercury manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
English k. Remove the pump and tank. l. Replace the parts that need to be replaced, reverse steps to reassemble. 4-14-3 Cleaning the filter on the front fan holder. a. Open the two side panels. b. Release the plastic clamps that hold the front panel onto the chassis, and remove the front panel. d. After cleaning the fan filter, reverse steps to reassemble. Recommended parts to purchase - GIGABYTE VGA Air Cooler - GIGABYTE Blue Eye (VGA Liquid Cooling) - GIGABYTE Chipset Water block - GIGABYTE Radiator c. Take out the fan holder and separate the fan holder from the fan. 26
26
English
k. Remove the pump and tank.
l. Replace the parts that need to be re-
placed, reverse steps to reassemble.
4-14-3 Cleaning the filter on the front fan
holder.
a. Open the two side panels.
b. Release the plastic clamps that hold
the front panel onto the chassis, and
remove the front panel.
c. Take out the fan holder and separate
the fan holder from the fan.
d. After cleaning the fan filter, reverse
steps to reassemble.
Recommended parts to purchase
-
GIGABYTE VGA Air Cooler
-
GIGABYTE Blue Eye (VGA Liquid
Cooling)
-
GIGABYTE Chipset Water block
-
GIGABYTE Radiator