Gigabyte 7CN700ID Manual - Page 25
First / Second / Third / Fourth Boot Device
View all Gigabyte 7CN700ID manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
English Virus Warning If it is set to enable, the category will flash on the screen when there is any attempt to write to the boot sector or partition table of the hard disk drive. The system will halt and the warning message will appear in the mean time. You can run anti-virus program to locate the problem. Enabled Activate automatically when the system boots up causing a warning message to appear when anything attempts to access the boot sector or hard disk partition table. Disabled No warning message to appear when anything attempts to access the boot sector or hard disk partition table. (Default value) BIOS Flash Protection This feature allows you determine the states that flash BIOS. Auto BIOS enables flash write access automatically when updating BIOS data/DMI/ESCD. (Default Value) Enabled During POST, DMI/ESCD would not be updated. But flash tools can update BIOS always. Quick Power On Self Test If it is set to Enable, BIOS will shorten or skip some check items during POST. Enabled Enabled quick POST.(Default Value) Disabled Normal POST. First / Second / Third / Fourth Boot Device LS120 Select your boot device priority by LS120. Hard Disk Select your boot device priority by Hard Disk. CDROM Select your boot device priority by CDROM. ZIP100 Select your boot device priority by ZIP100. USB-FDD Select your boot device priority by USB-FDD. USB-ZIP Select your boot device priority by USB-ZIP. USB-CDROM Select your boot device priority by USB-CDROM. Legacy LAN Select your boot device priority by Legacy LAN. Disabled Select your boot device priority by Disabled. Boot Other Device Enabled Enabled other device boot.(Default Value) Disabled Disabled this function. Boot Up Num Lock Staus On Keypad is number keys. (Default Value) Off Keypad is arrow keys. Security Option System The system can not boot and can not access to Setup page will be denied if the correct password is not entered at the prompt. Setup The system will boot, but access to Setup will be denied if the correct password is not entered at the prompt.(Default value) - 25 - BIOS Setup