Gigabyte 7CN700ID Manual - Page 31

English On-Chip SATA Enabled Disabled Enable onboard SATA port. (Default value) Disable onboard SATA port. SATA Mode IDE Select onboard Seria ATA function as IDE.(Default value) RAID Select onboard Seria ATA function as RAID.. IDE DMA transfer access Enabled Enable IDE DMA transfer access. (Default value) Disabled Disable this function. On-Chip IDE Channel0 Enabled Enable onboard 1st channel IDE port. (Default value) Disabled Disable onboard 1st channel IDE port. On-Chip IDE Channel1 Enabled Enable onboard 2nd channel IDE port. (Default value) Disabled Disable onboard 2nd channel IDE port. VIA-6102 MAC Address Input Please key in MAC Address. Onboard LAN Boot ROM This function decide whether to invoke the boot ROM of the onboard LAN chip. Enabled Enable this function. Disabled Disable this function.(Default value) OnChip USB Controller All Enabled Set USB controller function used all USB port. (Default value) All Disabled Set USB controller function Disabled. 1&2 USB Port Set USB controller function used USB port 1&2. 2&3 USB Port Set USB controller function used USB port 2&3. 1&3 USB Port Set USB controller function used USB port 1&3. 1 USB Port Set USB controller function used USB port 1. 2 USB Port Set USB controller function used USB port 2. 3 USB Port Set USB controller function used USB port 3. USB Emulation ON OFF Set on to USB emulation. (Default value) Set off to USB emulation. KB / MS Set KB/MS USB emulation. Onboard FDC Controller Disabled Disable onboard FDC controller. Enabled Enable onboard FDC controller. (Default value) - 31 - BIOS Setup