Gigabyte 7VT600P-RZC Manual - Page 12
Installing SATA controller driver during OS installation
View all Gigabyte 7VT600P-RZC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Ác (5) Installing SATA controller driver during OS installation Åé Now that you have prepared the SATA driver disk and configured BIOS settings, you are ready to install Windows 2000/XP onto your SATA hard drive with the SATA driver. The following is an example of ¤¤ Windows XP installation. ¤å Step 1: Restart your system to boot from the Windows 2000/XP Setup disk and press F6 as soon as you see the "Press F6 if you need to install a 3rd party SCSI or RAID driver" message (Figure 18). After pressing F6, there will be a few moments of some files being loaded before you see the next screen. Windows Setup Press F6 if you need to install a 3rd party SCSI or RAID driver. Figure 18 Step 2: When a screen similar to that below appears, insert the floppy disk containing the SATA driver and press S (Figure 19). Windows Setup Setup could not determine the type of one or more mass storage devices installed in your system, or you have chosen to manually specify an adapter. Currently, Setup will load support for the following mass storage devices(s) * To specify additional SCSI adapters, CD-ROM drives, or special disk controllers for use with Windows, including those for which you have a device support disk from a mass storage device manufacturer, press S. * If you do not have any device support disks from a mass storage device manufacturer, or do not want to specify additional mass storage devices for use with Windows, press ENTER. S=Specify Additional Device ENTER=Continue F3=Exit Figure 19 SATA Hard Drive Configurations (VT8237(R)) 12 -