Gigabyte B450M DS3H V2 User Manual - Page 14
LED_CPU CPU Cooler LED Strip/RGB LED Strip Header, SATA3 0/1/2/3 SATA 6Gb/s Connectors - rgb header
View all Gigabyte B450M DS3H V2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
5) LED_CPU (CPU Cooler LED Strip/RGB LED Strip Header) The header can be used to connect a CPU cooler LED strip or a standard 5050 RGB LED strip (12V/G/R/B), with maximum power rating of 2A (12V) and maximum length of 2m. Pin No. Definition 1 12V 1 2G 3R 4B RGB LED Strip 1 12V Connect the CPU cooler LED strip/RGB LED strip to the header. The power pin (marked with a triangle on the plug) of the LED strip must be connected to Pin 1 (12V) of this header. Incorrect connection may lead to the damage of the LED strip. 6) SATA3 0/1/2/3 (SATA 6Gb/s Connectors) The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA 1.5Gb/s standard. Each SATA connector supports a single SATA device. The SATA connectors support RAID 0, RAID 1, and RAID 10. Refer to Chapter 3, "Configuring a RAID Set," for instructions on configuring a RAID array. SATA3 1 7 3 1 7 2 1 1 7 0 1 7 Pin No. 1 2 3 4 5 6 7 Definition GND TXP TXN GND RXN RXP GND - 14 -