Gigabyte B450M DS3H V2 User Manual - Page 22

ƒƒ Advanced CPU Core Settings && CPU Clock Ratio, CPU Frequency The settings above are synchronous to those under the same items on the Advanced Frequency Settings menu. && Core Performance Boost Allows you to determine whether to enable the Core Performance Boost (CPB) technology, a CPU performance-boost technology. (Default: Auto) && AMD Cool&Quiet function Enabled Lets the AMD Cool'n'Quiet driver dynamically adjust the CPU clock and VID to reduce heat output from your computer and its power consumption. (Default) Disabled Disables this function. && SVM Mode Virtualization enhanced by Virtualization Technology will allow a platform to run multiple operating systems and applications in independent partitions. With virtualization, one computer system can function as multiple virtual systems. (Default: Disabled) && PPC Adjustment (Note 1) Allows you to fix the PState of the CPU. (Default: PState 0) && Global C-state Control Allows you to determine whether to let the CPU enter C states. When enabled, the CPU core frequency will be reduced during system halt state to decrease power consumption. (Default: Enabled) && Power Supply Idle Control Enables or disables Package C6 State. Typical Current Idle Disables this function. Low Current Idle Enables this function. Auto Lets the BIOS automatically configure this setting. (Default) && CCD Control (Note 1) Sets the number of CCDs to be used. (Default: Auto) && CPPC (Note 1) Enables or disables the CPPC feature. (Default: Auto) && CPPC Preferred Cores (Note 1) Enables or disables the CPPC Preferred Cores feature. (Default: Auto) && Opcache Control (Note 1) Enables or disables Opcache. Auto lets the BIOS automatically configure this setting. (Default: Auto) && Downcore Control Allows you to select the number of CPU cores to enable (the number of CPU cores may vary by CPU). Auto lets the BIOS automatically configure this setting. (Default: Auto) && SMT Mode Allows you to enable or disable the CPU Simultaneous Multi-Threading technology. This feature only works for operating systems that support multi-processor mode. Auto lets the BIOS automatically configure this setting. (Default: Auto) && Extreme Memory Profile (X.M.P.) (Note 2) Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when enabled. Disabled Disables this function. (Default) Profile1 Uses Profile 1 settings. Profile2 (Note 2) Uses Profile 2 settings. (Note 1) This item is present only when you install a CPU that supports this feature. (Note 2) This item is present only when you install a CPU and a memory module that support this feature. - 22 -