Gigabyte B560M AORUS PRO AX User Manual - Page 18

U _ _ _S _ _0 F __ 3 _S S_ _ B _U _ B F_USB3 F DEBUG DEBUG PORT PORT 6) LED_C1/LED_C2 (RGB LED Strip Headers) The headers can be used to connect a standard 5050 RGB LED strip (12V/G/R/B), with maximum power rating of 2A (12V) and maximum length of 2m. U 1 LED_C1 1 LED_C2 _3 Pin No. 1 2 3 4 Definition 12V G R B _ _B B RGB LED Strip 1 12V S F_ Connect your RGB LED strip to the header. The power pin (marked with a triangle on the plug) of the LED strip must be connected to Pin 1 (12V) of this header. Incorrect connection may lead to the damage of the LED strip. B_ _ 7) D_LED1/D_LED2 (Addressable LED Strip Headers) The headers can be used to connect a standard 5050 addressable LED strip, with maximum power rating of 5A (5V) and maximum number of 1000 LEDs. S_ 1 D_LED1 1 D_LED2 Pin No. 1 2 3 4 Definition V (5V) Data No Pin GND F_USB30 3 B_ Addressable LED Strip 1 Connect your addressable LED strip to the header. The power pin (marked with a triangle on the plug) of the LED strip must be connected to Pin 1 of the addressable LED strip header. Incorrect connection may lead to the damage of the LED strip. S F_ F_USB3 B For how to turn on/off the lights of the LED strip please visit the "Unique Features" webpage of GIGABYTE's website. Before installing the devices, be sure to turn off the devices and your computer. Unplug the power cord from the power outlet to prevent damage to the devices. 8) SATA3 0/1/2/3/4/5 (SATA 6Gb/s Connectors) The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA 1.5Gb/s standard. Each SATA connector supports a single SATA device. B_ USB 0_ B G.QBOFM SATA3 5 3 1 420 G.QBOFM G.QPBinOFNMo. 1 2 Definition GND TXP _ 7 1 3 TXN 7 1 4 GND 5 RXN 6 RXP 7 GND _3 F _0 _F _0 F U To enable hot-plugging for the SATA ports, refer to Chapter 2, "BIOS Setup," "Settings\IO Ports\ SATA And RST Configuration," for more information. - 18 - B_