Gigabyte GA-3PXSL User Manual - Page 44
LAN Controller, IDE HDD Block Mode, Onboard, FDC Controller, Onboard Serial Port 1, Onboard Serial
![]() |
View all Gigabyte GA-3PXSL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
GA-3PXSL-RH Motherboard 2nd LAN Controller Auto Disabled Auto detect onboard second H/W LAN. (Default value) Disable this function. IDE HDD Block Mode The IDE HDD Block Mode feature speeds up hard disk access by transferring data from multiple sectors at once instead of using the old single sector transfer mode. When you enable it, the BIOS will automatically detect if your hard disk supports block transfers and configure the proper block transfer settings for it. Up to 64KB of data can be transferred per interrupt with IDE HDD Block Mode enabled. Enabled Enable IDE HDD Block Mode. (Default value) Disabled Disable this function. Onboard FDC Controller Enabled Select "enabled" to active Onboard Floppy Controller. (Default value) Disabled Disable this function. Onboard Serial Port 1 Auto BIOS will automatically setup the port 1 address. 3F8/IRQ4 Enable onboard Serial port 1 and set IO address to 3F8. (Default value) 2F8/IRQ3 Enable onboard Serial port 1 and set IO address to 2F8. 3E8/IRQ4 Enable onboard Serial port 1 and set IO address to 3E8. 2E8/IRQ3 Enable onboard Serial port 1 and set IO address to 2E8. Disabled Disable onboard Serial port 1. Onboard Serial Port 2 Auto BIOS will automatically setup the port 2 address. 3F8/IRQ4 Enable onboard Serial port 2 and set IO address to 3F8. 2F8/IRQ3 Enable onboard Serial port 2 and set IO address to 2F8. (Default value) 3E8/IRQ4 Enable onboard Serial port 2 and set IO address to 3E8. 2E8/IRQ3 Enable onboard Serial port 2 and set IO address to 2E8. Disabled Disable onboard Serial port 2. 44
![](/manual_guide/products/gigabyte-ga3pxsl-user-manual-e75a170/44.png)