Gigabyte GA-73VM-S2 Manual - Page 39
Onboard LAN Boot ROM - lan driver
View all Gigabyte GA-73VM-S2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
AHCI Configures the SATA controller to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. RAID Enables RAID for the SATA controller. SATA-II Pri-Master RAID Enables or disables RAID for the first SATA 3Gb/s connector (SATAII0). This item is configurable only if the Onchip SATA Mode item is set to RAID. (Default: Enabled) SATA-II Pri-Slave RAID Enables or disables RAID for the second SATA 3Gb/s connector (SATAII1). This item is configurable only if the Onchip SATA Mode item is set to RAID. (Default: Enabled) SATA-II Sec-Master RAID Enables or disables RAID for the third SATA 3Gb/s connector (SATAII2). This item is configurable only if the Onchip SATA Mode item is set to RAID. (Default: Enabled) SATA-II Sec-Slave RAID Enables or disables RAID for the fourth SATA 3Gb/s connector (SATAII3). This item is configurable only if the Onchip SATA Mode item is set to RAID. (Default: Enabled) On-Chip MAC Lan Enables or disables the onboard LAN function. (Default: Auto) If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled. Onboard LAN Boot ROM Allows you to decide whether to activate the boot ROM integrated with the onboard LAN chip. (Default: Disabled) Onboard Audio Function Enables or disables the onboard audio function. (Default: Auto) If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to Disabled. On-Chip USB Configures the integrated USB controller. V1.1+V2.0 Enables the integrated USB 1.1 and USB 2.0 controllers. (Default) V1.1 Enables only the integrated USB 1.1 controller. Disabled Disables the integrated USB 1.1 and USB 2.0 controllers. USB Memory Type Specifies the type of memory allocated for USB devices. Options are: SHADOW (default), Base Memory (640K). USB Keyboard Support Allows USB keyboard to be used in MS-DOS. (Default: Disabled) USB Mouse Support Allows USB mouse to be used in MS-DOS. (Default: Disabled) - 39 - BIOS Setup