Gigabyte GA-78LMT-S2 Manual - Page 25
Standard CMOS Features, Options are: All Errors, No Errors, All, But Keyboard. Default
View all Gigabyte GA-78LMT-S2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Normal CPU Vcore Displays the normal operating voltage of your CPU. Normal CPU Vcore NB Displays the normal operating voltage of your CPU North Bridge. 2-4 Standard CMOS Features CMOS Setup Utility-Copyright (C) 1984-2012 Award Software Standard CMOS Features Date (mm:dd:yy) Thu, Apr 19 2012 Time (hh:mm:ss) 22:31:24 Item Help Menu Level } IDE Channel 0 Master } IDE Channel 0 Slave } IDE Channel 1 Master } IDE Channel 1 Slave } IDE Channel 2 Master } IDE Channel 2 Slave [None] [None] [None] [None] [None] [None] Halt On [All, But Keyboard] Base Memory Extended Memory 640K 766M Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults Date (mm:dd:yy) Sets the system date. Time (hh:mm:ss) Sets the system time. IDE Channel 0, 1 Master/Slave IDE Channel 0, 1 Master/Slave Configure your SATA devices by using one of the three methods below: •• None If no SATA devices are used, set this item to None so the system will skip the detection of the device during the POST for faster system startup. •• Auto Lets the BIOS automatically detect SATA devices during the POST. (Default) Access Mode Sets the hard drive access mode. Options are: Auto (default), CHS, LBA, Large. Capacity Approximate capacity of the currently installed hard drive. IDE Channel 2 Master/Slave Extended IDE Drive Configure your SATA devices by using one of the two methods below: •• Auto Lets the BIOS automatically detect SATA devices during the POST. (Default) •• None If no SATA devices are used, set this item to None so the system will skip the detection of the device during the POST for faster system startup. Access Mode Sets the hard drive access mode. Options are: Auto (default), Large. Capacity Approximate capacity of the currently installed hard drive. Halt On Allows you to determine whether the system will stop for an error during the POST. Options are: "All Errors," "No Errors," "All, But Keyboard". (Default) Memory These fields are read-only and are determined by the BIOS POST. - 25 -