Gigabyte GA-8GNXP-D Manual - Page 38

English Onboard H/W LAN (LAN1 port) Enabled Enable onboard H/W LAN function. (Default value) Disabled Disable this function. Onboard H/W LAN2 (LAN2 port) Enabled Enable onboard H/W LAN2 function. (Default value) Disabled Disable this function. Onboard LAN1 Boot ROM (LAN1 port) This function decide whether to invoke the boot ROM of the onboard LAN chip. Enabled Enable this function. Disabled Disable this function. (Default value) Onboard LAN2 Boot ROM (LAN2 port) This function decide whether to invoke the boot ROM of the onboard LAN chip. Enabled Enable this function. Disabled Disable this function. (Default value) Onboard Serial Port 1 Auto BIOS will automatically setup the port 1 address. 3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8. (Default value) 2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8. 3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8. 2E8/IRQ3 Enable onboard Serial port 1 and address is 2E8. Disabled Disable onboard Serial port 1. Onboard IrDA Port Auto BIOS will automatically setup the port 1 address. 3F8/IRQ4 Enable onboard IrDA port and address is 3F8. 2F8/IRQ3 Enable onboard IrDA port and address is 2F8. (Default value) 3E8/IRQ4 Enable onboard IrDA port and address is 3E8. 2E8/IRQ3 Enable onboard IrDA port and address is 2E8. Disabled Disable onboard IrDA port. UART Mode Select This item allows you to determine which Infra Red(IR) function of Onboard I/O chip. IrDA Set onboard I/O chip UART to IrDA Mode. (Default value) ASKIR Set onboard I/O chip UART to ASKIR Mode. UR2 Duplex Mode This feature allows you to seclect IR mode. Half IR Function Duplex Half. (Default value) Full IR Function Duplex Full. Onboard Parallel port Disabled Disable onboard LPT port. 378/IRQ7 Enable onboard LPT port and address is 378/IRQ7. (Default value) 278/IRQ5 Enable onboard LPT port and address is 278/IRQ5. 3BC/IRQ7 Enable onboard LPT port and address is 3BC/IRQ7. GA-8GNXP-D Motherboard - 38 -