Gigabyte GA-8GNXP-D Manual - Page 71
Enter, Capacity, Create Volume
View all Gigabyte GA-8GNXP-D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
English The KB is a unit of Strip Size. You can set disk block size with this item. The disk block size can be set from 4KB to 128KB. After you set disk block size, press Enter to set disk Capacity. Intel(R) Application Accelerator RAID Option ROM v4.0.6180 Copyright(C) 2003-04 Intel Corporation. All Rights Reversed. [ CREATE VOLUME MENU ] Name : RAID Level : Disks : Strip Size : Capacity : RAID_Volume0 RAID0(Stripe) Select Disks 128KB 223.5 GB Create Volume [ HELP ] Choose the RAID level best suited to your usage model. The following are typical values: 16KB - Best for sequential transfers 64KB - Good general purpose strip size 128KB - Best performance for most desktops and workstations [ ]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select Intel(R) Application Accelerator RAID Option ROM v4.0.6180 Copyright(C) 2003-04 Intel Corporation. All Rights Reversed. [ CREATE VOLUME MENU ] Name : RAID Level : Disks : Strip Size : Capacity : RAID_Volume0 RAID0(Stripe) Select Disks 128KB 223.5 GB Create Volume [ HELP ] Enter the volume capacity. The default value indicates the maximum volume capacity using the selected disks. If less than the maximum capacity is chosen, creation of a second volume is needed to utilize the remaining space. [ ]-Change [TAB]-Next [ESC]-Previous Menu Press Enter to enter Create Volume after setting disk capacity. [ENTER]-Select - 71 - Appendix