Gigabyte GA-8IK1100 User Manual - Page 11
Only for GA-8KNXP. - overclock
View all Gigabyte GA-8IK1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
English On-Board SATA RAID * On-Board 1394 PS/2 Connector BIOS Additional Features Jumper less Overclocking y Built in Silicon Image Sil3112 y Supports Disk striping (RAID0) or DISK Mirroring (RAID1) y Supports UDMA up to 150 MB/sec y UDMA and PIO Modes y Up to 2 SATA devices y ACPI and ATA/ATAPI6 y Supports hot plug funcion (SATA0_SII/SATA1_SII) y Built-in TSB43AB23 chip y PS/2 Keyboard interface and PS/2 Mouse interface y Licensed AWARD BIOS, 4M bit x 2 FWH y Supports Dual BIOS y Supports Multi Language BIOS y Supports Face Wizard y Supports Q-Flash y Supports CPU Dual Power System 2 (DPS2)* y PS/2 Keyboard power on by password y PS/2 Mouse power on y External Modem wake up y STR(Suspend-To-RAM) y Wake on LAN (WOL) y AC Recovery y Poly fuse for keyboard over-current protection y USB KB/Mouse wake up from S3 y Supports @BIOS y Supports EasyTune 4 y Supports clear password function y Over Clock (CPU/DDR/AGP) by BIOS HT functionality requirement content : Enabling the functionality of Hyper-Threading Technology for your computer system requires all of the following platform components: - CPU: An Intel® Pentium 4 Processor with HT Technology - Chipset: An Intel® Chipset that supports HT Technology - BIOS: A BIOS that supports HT Technology and has it enabled - OS: An operation system that has optimizations for HT Technology Please set the CPU host frequency in accordance with your processor's specifications. We don't recommend you to set the system bus frequency over the CPU's specification because these specific bus frequencies are not the standard specifications for CPU, chipset and most of the peripherals. Whether your system can run under these specific bus frequencies properly will depend on your hardware configurations, including CPU, Chipsets, SDRAM, Cards...etc. * Only for GA-8KNXP. - 7 - Introduction