Gigabyte GA-8S661FXM-775 Manual - Page 36

English 2-3 Integrated Peripherals CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Integrated Peripherals IDE1 Conductor Cable IDE2 Conductor Cable On-Chip Primary PCI IDE On-Chip Secondary PCI IDE AC97 Audio Onboard LAN device USB Controller USB Legacy Support SiS Serial ATA Controller SiS Serial ATA Mode Onboard Serial Port 1 Onboard Serial Port 2 Onboard Parallel Port Parallel Port Mode ECP Mode Use DMA [Auto] [Auto] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Disabled] [Enabled] [RAID] [3F8/IRQ4] [2F8/IRQ3] [378/IRQ7] [ECP] 3 Item Help Menu Level ` [Auto] Auto-detect IDE cable type [ATA 66/100/133] Set Conductor Cable to ATA66/100/133 (80 Pins) [Disabled] Set Conductor Cable ATA33 (40 Pins) KLJI: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults IDE1 Conductor Cable Auto BIOS autodetects IDE1 conductor cable .(Default Value) ATA66/100/133 Set IDE1 Conductor Cable to ATA66/100/133 (Please make sure your ATA33 IDE device and cable are compatible with ATA66/100/133). Set IDE1 Conductor Cable to ATA33. (Please make sure your IDE device and cable are compatible with ATA33) IDE2 Conductor Cable Auto BIOS autodetects IDE2 conductor cable. (Default Value) ATA66/100/133 ATA33 Set IDE2 Conductor Cable to ATA66/100/133. (Please make sure your IDE device and cable are compatible with ATA66/100/133) Set IDE2 Conductor Cable to ATA33. (Please make sure your IDE device and cable are compatible with ATA33) On-Chip Primary PCI IDE Enabled Enable onboard 1st channel IDE port. (Default value) Disabled Disable onboard 1st channel IDE port. On-Chip Secondary PCI IDE Enabled Enable onboard 2nd channel IDE port. (Default value) Disabled Disable onboard 2nd channel IDE port. AC97 Audio Enabled Disabled Autodetect AC97 audio function. (Default value) Disable AC97 audio function. GA-8S661FXM-775 Motherboard - 36 -