Gigabyte GA-965P-S3 Manual - Page 13
audio jacks Line In / Line Out / MIC In/Surround Speaker Out Rear - ds3 bios
View all Gigabyte GA-965P-S3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
English Internal Connectors 3 USB 2.0/1.1 connectors for additional 6 ports by cables 1 S/PDIF In connector 1 power LED connector 1 Chassis Intrusion connector Rear Panel I/O 1 PS/2 keyboard port 1 PS/2 mouse port 1 S/PDIF Out connection (coaxial+optical) 1 parallel port 1 serial port 4 USB 2.0/1.1 ports 1 RJ-45 port 6 audio jacks (Line In / Line Out / MIC In/Surround Speaker Out (Rear Speaker Out)/Center/Subwoofer Speaker Out/Side Speaker Out) I/O Control IT8718 chip Hardware Monitor System voltage detection CPU/System temperature detection CPU/System/Power fan speed detection CPU warning temperature CPU/System/Power fan failure warning CPU Smart Fan Control BIOS 1 8 Mbit flash ROM Use of licensed AWARD BIOS PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b Additional Features Supports @BIOS Supports Download Center Supports Q-Flash Supports EasyTune (Note 3) Supports Xpress Install Supports Xpress Recovery2 Supports Xpress BIOS Rescue Bundle Software Norton Internet Security (OEM revision) Form Factor ATX form factor; 30.5cm x 21.0cm (Note 1) Applies only when the GA-965P-DS3/S3 motherboard (rev. 3.3) is installed with a 1333 MHz FSB processor. The system will automatically adjust BIOS to support 1333 MHz FSB by overclocking when a 1333 MHz FSB processor is installed. In such a configuration, the actual operating memory frequency will be 667 MHz or 833 MHz, depending on the memory being installed. (Note 2) To use a DDRII 800/667 memory module on the motherboard, you must install a 1333/1066/ 800 MHz FSB processor. (Note 3) EasyTune functions may vary depending on different motherboards. - 13 - Hardware Installation