Gigabyte GA-990FXA-UD5 Manual - Page 25
SATA3_0/1/2/3/4/5 SATA 6Gb/s Connectors, Controlled by AMD SB950 South Bridge
View all Gigabyte GA-990FXA-UD5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
7) SATA3_0/1/2/3/4/5 (SATA 6Gb/s Connectors, Controlled by AMD SB950 South Bridge) The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA 1.5Gb/s standards. Each SATA connector supports a single SATA device. The AMD SB950 South Bridge supports RAID 0, RAID 1, RAID 5, RAID 10, and JBOD. Refer to Chapter 5, "Configuring SATA Hard Drive(s)," for instructions on configuring a RAID array. G.QBOFM G.QBOFM GP.inQNBOoF. M Definition SATA3_0 7 SATA3_2 SATA3_4 1 1 GND 2 TXP 3 TXN 7 1 4 GND SATA3_1 SATA3_3 SATA3_5 5 RXN 6 RXP 7 GND 8) GSATA3_6/7 (SATA 6Gb/s Connectors, Controlled by Marvell 88SE9172 Chip) BUG DEBUG RT PORT The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA 1.5Gb/s standard. Each SATA connector supports a single SATA device. The Marvell 88SE9172 chip supports RAID 0 and RAID 1. Refer to Chapter 5, "Configuring SATA Hard Drive(s)," for instructions on configuring a RAID array. Pin No. Definition G.QBOFM 1 GND GSATA3_7 7 1 2 TXP 3 TXN 4 GND 7 1 5 RXN GSATA3_6 6 RXP 7 GND Please connect the L-shaped end of the SATA cable to your SATA hard drive. BUG RT • A RAID 0 or RAID 1 configuration requires at least two hard drives. If more than two hard drives are to be used, the total number of hard drives must be an even number. • A RAID 5 configuration requires at least three hard drives. (The total number of hard drives does not have to be an even number.) • A RAID 10 configuration requires four hard drives. - 25 - Hardware Installation