Gigabyte GA-990FXA-UD5 Manual - Page 46

F_USB30 Controller Etron EJ168 USB controller, USB 3.0/2.0 ports routed to the - amd s

Get Gigabyte GA-990FXA-UD5 PDF manuals and user guides View all Gigabyte GA-990FXA-UD5 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

OnChip SATA Port4/5 Type (AMD SB950 South Bridge, SATA3_4/SATA3_5 connectors) This option is configurable only when OnChip SATA Type is set to RAID or AHCI. Configures the operating mode of the integrated SATA3_4/SATA3_5 connectors. IDE Disables RAID for the SATA controller and configures the SATA controller to PATA mode. (Default) As SATA Type The mode depends on the OnChip SATA Type settings. OnChip SATA RAID5 Support (AMD SB950 South Bridge, SATA3_0~SATA3_5 connectors) Enables or disables RAID 5 support for the SATA controller integrated in the AMD SB950 South Bridge. This option is configurable only when OnChip SATA Type is set to RAID. OnChip SATA3.0 Support Enables or disables the SATA 6Gb/s function integrated in the South Bridge. When set to Disabled, the SATA controller will operate in SATA 3Gb/s mode. (Default: Enabled)  OnChip SATA Port as ESP CMOS Setup Utility-Copyright (C) 1984-2011 Award Software OnChip SATA Port as ESP Port0 as ESP Port1 as ESP Port2 as ESP Port3 as ESP x Port4 as ESP x Port5 as ESP [Disabled] [Disabled] [Disabled] [Disabled] Disabled Disabled Item Help Menu Level  Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults Port0 as ESP/Port1 as ESP/Port2 as ESP/Port3 as ESP This option is configurable only when OnChip SATA Type is set to AHCI. Enabled will speed up the hot plug detection of the connected SATA device. (Default: Disabled) Port4 as ESP/Port5 as ESP This option is configurable only when OnChip SATA Type is set to AHCI and OnChip SATA Type Port4/5 is set to as SATA Type. Enabled will speed up the hot plug detection of the connected SATA device. (Default: Disabled) F_USB30 Controller (Etron EJ168 USB controller, USB 3.0/2.0 ports routed to the onboard F_USB30 header) Enables or disables the Etron EJ168 USB controller. (Default: Enabled) eSATA3 Controller (Marvell 88SE9172 chip, eSATA connectors on the back panel) Enables or disables the SATA controller integrated in the Marvell 88SE9172 chip. (Default: Enabled) BIOS Setup - 46 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
BIOS Setup
- 46 -
OnChip SATA Port4/5 Type (AMD SB950 South Bridge,
SATA3_4/SATA3_5 connectors)
This option is configurable only when
OnChip SATA Type
is set to
RAID
or
AHCI
. Configures the oper-
ating mode of the integrated SATA3_4/SATA3_5 connectors.
IDE
Disables RAID for the SATA controller and configures the SATA controller to PATA
mode. (Default)
As SATA Type
The mode depends on the
OnChip SATA Type
settings.
OnChip SATA RAID5 Support (AMD SB950 South Bridge,
SATA3_0~SATA3_5 connectors)
Enables or disables RAID 5 support for the SATA controller integrated in the AMD SB950 South Bridge.
This option is configurable only when
OnChip SATA Type
is set to
RAID
.
OnChip SATA3.0 Support
Enables or disables the SATA 6Gb/s function integrated in the South Bridge. When set to
Disabled
, the
SATA controller will operate in SATA 3Gb/s mode. (Default: Enabled)
Port0 as ESP/Port1 as ESP/Port2 as ESP/Port3 as ESP
This option is configurable only when
OnChip SATA Type
is set to
AHCI
.
Enabled
will speed up the hot
plug detection of the connected SATA device. (Default: Disabled)
Port4 as ESP/Port5 as ESP
This option is configurable only when
OnChip SATA Type
is set to
AHCI
and
OnChip SATA Type
Port4/5
is set to
as SATA Type
.
Enabled
will speed up the hot plug detection of the connected SATA
device. (Default: Disabled)
F_USB30 Controller (Etron EJ168 USB controller, USB 3.0/2.0 ports routed to the on-
board F_USB30 header)
Enables or disables the Etron EJ168 USB controller. (Default: Enabled)
eSATA3 Controller (
Marvell 88SE9172
chip, eSATA connectors on the back panel)
Enables or disables the SATA controller integrated in the Marvell 88SE9172 chip. (Default: Enabled)
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
OnChip SATA Port as ESP
Port0 as ESP
[Disabled]
Port1 as ESP
[Disabled]
Port2 as ESP
[Disabled]
Port3 as ESP
[Disabled]
x
Port4 as ESP
Disabled
x
Port5 as ESP
Disabled
higf
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Item Help
Menu Level
OnChip SATA Port as ESP