Gigabyte GA-9SISL Manual - Page 23
LED_BMC BMC Firmware Readiness LED, BAT Battery cable connector
View all Gigabyte GA-9SISL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
13) LED_BMC (BMC Firmware Readiness LED) State Description On BMC firmware is initial Blinking BMC firmware is ready Off System is powered off 14) BAT (Battery cable connector) The battery provides power to keep the values (such as BIOS configurations, date, and time information) in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a low level, or the CMOS values may not be accurate or may be lost. • Always turn off your computer and unplug the power cord before replacing the battery. • Replace the battery with an equivalent one. Danger of explosion if the battery is replaced with an incorrect model. • Contact the place of purchase or local dealer if you are not able to replace the battery by yourself or uncer- tain about the battery model. • When installing the battery, note the orientation of the positive side (+) and the negative side (-) of the bat- tery (the positive side should face up). • Used batteries must be handled in accordance with local environmental regulations. - 23 - Hardware Installation